Class I, Division 1 rated electric heat-traced stations prevent freezing in extremely hazardous, cold weather conditions where flammable gases are routinely expected.
Electric heat-traced stations prevent freezing even in extreme conditions
FM, UL, and CSA approved for Class I, Division 1, Groups B, C, and D.
Unit is fully wired at factory. Junction box and components rated for Class I, Division 1, Groups B, C, and D.
Note: In order to meet Class I, Division 1 requirements, approved conduit and fittings must be used during installation.
Units are intended for cold weather environments down to -40°C
UV-resistant orange ABS plastic with polyethylene foam insulation. Jacket sections secured with removable stainless-steel screws for easy maintenance.
254mm diameter orange ABS plastic with 75.7LPM flow control.
1" IPS brass stay-open ball valve. US-made with brass ball and PTFE seals. Includes stainless steel actuating arm and 737mm stainless steel pull rod.
1-1/4" NPT female top inlet.
Comes wired ready to connect to 240V power supply.
Comes with ANSI compliant signage
We recommend that this unit be installed with a series tempering valve to meet the ANSI requirement of “tepid” water supply.
Factory tested prior to shipment. Ships fully assembled and crated.
Stocked Item: No - these are made to order, allow 6-8 weeks for manufacture and shipping.