Esko Hot Shot Welders Glove

Information

• High quality red cow split leather
• Kevlar stitched to withstand high temperatures for longer periods
• Lined and welted
• Reinforced palm to first finger for added durability
• 406mm (16 inches) long for forearm protection
• Size: One size fits all

EN 388:2003 - Result 4144

The standard for certifying protective gloves against mechanical risks. The numbers represent (L to R) resistance to abrasion, cut (coup test), tear and puncture.

EN 388:2016 - Result 4144X

Updates the EN 388:2008 standard. It continues the previous test’s methods with some alterations including a change to the way the coup cut test is carried out (the second figure giving the coup cut resistance rating may be expressed as 'X' if the glove is not tested under the coup test or if the rolling blade becomes blunt before the test is completed). It adds a fifth letter (A to F, with F being highest) for cut resistance using the sliding blade TDM test and a sixth letter to indicate impact protection, expressed as 'P' for pass. If the glove is not designed to provide impact protection the sixth figure is left out, or sometimes 'F' (fail).

EN 407 - Result 423X 4X

The standard for gloves to protect against thermal risks. The numbers indicate the glove’s performance for (1) material fire properties, (2) contact heat, (3) convective heat, (4) radiant heat, (5) small splashes, and (6) large quantities of molten metal. The higher the number the better the performance.